IPC704 244-704-000-042 A1-B03-C100-D100-E5-F2000-G0-H0-I0 Signal Conditioner
Description
| Manufacture | Others |
| Model | IPC704 244-704-000-042 |
| Ordering information | A1-B03-C100-D100-E5-F2000-G0-H0-I0 |
| Catalog | Vibration Monitoring |
| Description | IPC704 244-704-000-042 A1-B03-C100-D100-E5-F2000-G0-H0-I0 Signal Conditioner |
| Origin | Switzerland |
| HS Code | 85389091 |
| Dimension | 16cm*16cm*12cm |
| Weight | 0.8kg |
Details
For CA xxx piezoelectric accelerometers and CP xxx dynamic pressure sensors
» Configurable high-pass and low-pass filters
» Frequency range: 0.5 Hz to 20 kHz
» Optional integrator to produce a velocity output» Optional 2-wire current or 3-wire voltage transmission
» Certified for use in potentially explosive atmospheres
» A range of installation options are available
DESCRIPTION
The IPC 704 signal conditioner converts the charge based signal from a piezoelectric-based transducer
into a current or a voltage signal. This current or volt age signal is transmitted to the processing electronics via a standard 2-wire or 3-wire transmission cable.
The current modulation technique allows transmission over a distance of up to 1 km. A GSI galvanic
separation unit is required for this configuration.
The electronic circuitry of the IPC 704 signal conditioner is incorporated into a moulded aluminium
enclosure. The signal conditioner has configurable high-pass and low-pass filters and an optional inte
grator to give a velocity output. Furthermore, RFI filters protect the input and output against radio
frequency interference and other electromagnetic influences.
A range of installation options are available for the IPC 704 signal conditioner, including:
» A polyester enclosure providing environmental protection against dust, oil and water jets.
» A mounting adaptor allowing the IPC 704 signal conditioner to be mounted on a DIN rail.
