Control System S800 I/O Suppliers – ABB CI853K01 3BSE018103R1 Dual RS232-C Interface – RuiMingSheng
Control System S800 I/O Suppliers – ABB CI853K01 3BSE018103R1 Dual RS232-C Interface – RuiMingSheng Detail:
Description
| Manufacture | ABB |
| Model | CI853K01 |
| Ordering information | 3BSE018103R1 |
| Catalog | 800xA |
| Description | CI853K01 Dual RS232-C Interface |
| Origin | Sweden (SE) |
| HS Code | 85389091 |
| Dimension | 16cm*16cm*12cm |
| Weight | 0.8kg |
Details
CI853 RS-232 module protocols:
COMLI can be used on the build in COM3 port and optionally on the CI853 ports. The cable length can be extended considerably (to several km) using a fiber optic converter. RS-232C is the standard communication interface used for serial communication with COMLI. The CI853 supports Hot Swap. COMLI is an ABB protocol for data transmission between controllers. It is designed for asynchronous master/slave communication in half-duplex. COMLI protocol supports dial-up modem controlled from the application. CI853 supports both Master/Slave mode in COMLI.
MODBUS RTU is a standard protocol widely spread because of its ease of use and reliability. Modbus RTU is an open, serial (RS-232 or RS-485) protocol derived from the Master/Slave architecture exchanging information in half duplex mode. The Modbus functionality can be configured both on the COM ports of AC 800M and CI853. Module Redundancy is not available in MODBUS RTU. CI853 supports only Master mode in MODBUS RTU.
Features and benefits
- COMLI can be used on the build in COM3 port and optionally on the CI853 ports. RS-232C is the standard communication interface used for serial communication with COMLI. The CI853 supports Hot Swap. COMLI is an ABB protocol for data transmission between controllers.
- MODBUS RTU is an open, serial (RS-232 or RS-485) protocol derived from the Master/Slave architecture exchanging information in half duplex mode. The Modbus functionality can be configured both on the COM ports of AC 800M and CI853.
- Siemens 3964R can be used on the build in COM3 port and optionally on the CI853 ports. A standard RS-232C/485 communication channel is required.
- Self-defined Serial Communication can be used on the built in COM3 port (on an AC 800M Controller) and optionally on the CI853 ports.
- The CI853 module also supports Hot Swap.
Datasheet link
Product detail pictures:
Related Product Guide:
Our primary objective is usually to offer our shoppers a serious and responsible small business relationship, offering personalized attention to all of them for Control System S800 I/O Suppliers – ABB CI853K01 3BSE018103R1 Dual RS232-C Interface – RuiMingSheng , The product will supply to all over the world, such as: Saudi Arabia, Swansea, Irish, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and solutions and good service for domestic and international customers.
By Mamie from Mexico - 2017.04.18 16:45
This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
By Quintina from Roman - 2018.09.19 18:37
