Best IS200TDBSH2A Company - GE DS200SDCCG5AHD drive control card – RuiMingSheng
Best IS200TDBSH2A Company - GE DS200SDCCG5AHD drive control card – RuiMingSheng Detail:
Description
Manufacture | GE |
Model | DS200SDCCG5AHD |
Ordering information | DS200SDCCG5AHD |
Catalog | Speedtronic Mark V |
Description | GE DS200SDCCG5AHD drive control card |
Origin | United States (US) |
HS Code | 85389091 |
Dimension | 16cm*16cm*12cm |
Weight | 0.8kg |
Details
The DS200SDCCG5AHD is a drive control card for certain Mark V Speedtronic applications.
G2 versions of this board were never manufactured, but there are G1, G3, G4, and G5 versions. Please be sure to order the correct board for your application. This board was replaced by the DS215SDCC circuit board. It is important to note these boards are not backward compatible due to added components on the DS215 board.
The DS200SDCCG5AHD contains the main control circuitry and software needed for a drive or an exciter. The board includes interface circuitry to allow it to connect to and communicate with other boards, and to process signals from these boards. The board includes a number of advanced Xilinx chip components along with other integrated circuits. This includes the drive control processor and a motor control processor as well as a co-motor processor.
Other board components include multiple resistor network arrays, jumper switches, DIP switches, a reset button, and a number of capacitors, resistors, and diodes. The board also has vertical pin connectors along with several sets of standoffs that allow daughterboards to be mounted to the SDCC to increase and expand its capabilities.
The DS200SDCCG5AHD is marked with the GE logo and with the board id number. It has been drilled at each corner to allow for mounting.
The DS200SDCCG5A GE Drive Control Board is the primary controller for the drive and is populated with 3 microprocessors and RAM that can be accessed by multiple microprocessors at the same time. These microprocessors are assigned a specific task involved in the drive control processing and have installed on them the firmware and hardware required to perform the tasks. This boards primary function is an input output located in the C core in the GE Speedtronic MKV panel. The MKV controls and protects the turbine through the CSP.
The circuit boards main function is NOx detection and emergency overspeed. It features five EPROM connectors for storing configuration software with four of the EPROM modules storing configuration parameters that are assigned in the factory. The leaves the last remaining EPROM module to store configuration parameters that are assigned by the user or servicer. Though this board is populated with EPROM chip modules you must use the one from the original board as they contain all the configuration data you need so you can quickly bring the drive back online and avoid any loss in productivity or downtime.
The board also contains jumpers that are set to configure the board as well as connectors and standoffs allowing you to attach auxillary cards with screws inserted in the standoffs, then connect a cable from the auxiliary card to the board. The aux cards will enable you to connect to a local area network or add to the signal processing capabilities of the board.
Datasheet link
Product detail pictures:
Related Product Guide:
With this motto in mind, we've got develop into amongst one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for Best IS200TDBSH2A Company - GE DS200SDCCG5AHD drive control card – RuiMingSheng , The product will supply to all over the world, such as: Costa Rica, Lisbon, panama, Wide selection and fast delivery for you! Our philosophy: Good quality, great service, keep improving. We are looking forward that more and more oversea friends join in our family for further development near the future!
By Nydia from Swaziland - 2018.11.02 11:11
This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
By Eileen from Swiss - 2018.09.19 18:37