Best DS215TCQBG1BZZ01A Supplier - GE DS215TCEAG1BZZ01A DS200TCEAG1BRE DS200TCEAG1B Emergency Over Speed Board – RuiMingSheng
Best DS215TCQBG1BZZ01A Supplier - GE DS215TCEAG1BZZ01A DS200TCEAG1BRE DS200TCEAG1B Emergency Over Speed Board – RuiMingSheng Detail:
Description
Manufacture | GE |
Model | DS215TCEAG1BZZ01A |
Ordering information | DS200TCEAG1BRE DS200TCEAG1B |
Catalog | Speedtronic Mark V |
Description | GE DS215TCEAG1BZZ01A DS200TCEAG1BRE DS200TCEAG1B Emergency Over Speed Board |
Origin | United States (US) |
HS Code | 85389091 |
Dimension | 16cm*16cm*12cm |
Weight | 0.8kg |
Details
The General Electric Emergency Overspeed Board model DS200TCEAG1B features one microprocessor and multiple programmable read only memory (PROM) modules. It also contains 3 fuses, 30 jumpers, and a pair of bayonet connectors.
The board monitors the drive for over speed and flame detection trip conditions and shuts down the drive as appropriate. The bayonet connectors are used to connect the board to other devices and boards in the drive. The male bayonet connectors on the end of the cables require some consideration before you connect them to the female connectors on the board. To remove a bayonet connector, hold the connector with one hand and with the other hand secure the board to keep it from bending or moving. Pull the bayonet connector out of the female connector on the board and put the cable aside until you are ready to connect it to the replacement board.
One warning is that you must not disconnect the bayonet connector by pulling on the cable and not the connector. This might damage the cable by pulling the signal wires out of the bayonet connector. Also, refrain from accidentally touching the other components on the board with the bayonet connector. You might bend or scratch the components or the surface of the board.
The DS200TCEAG1B GE Emergency Overspeed Board features one microprocessor and multiple programmable read only memory (PROM) modules and is located in the P core of the MKV panel. Its main purpose is to process the overspeed and flame detection trip signals from the turbine. If the circuit board is removed the berg jumpers must be reset. The board is designed with 3 fuses, 30 jumpers and 2 bayonet connectors.
The PROM modules store the firmware and operating instructions used by the microprocessor. When replacing this board you will notice that there are no PROM modules on the replacement board. Since the PROM modules are easily removed and installed, you will find it is a simple task to move the modules from the defective board to the replacement.
Datasheet link
Product detail pictures:
Related Product Guide:
We usually think and practice corresponding for the change of circumstance, and grow up. We aim at the achievement of a richer mind and body as well as the living for Best DS215TCQBG1BZZ01A Supplier - GE DS215TCEAG1BZZ01A DS200TCEAG1BRE DS200TCEAG1B Emergency Over Speed Board – RuiMingSheng , The product will supply to all over the world, such as: Pretoria, Atlanta, Bogota, In order to carry out our goal of "customer first and mutual benefit" in the cooperation, we establish a professional engineering team and a sales team to supply the best service to satisfy our customers' requirements. Welcome you to cooperate with us and join us. We are your best choice.
By Mike from Jordan - 2017.08.28 16:02
The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
By Erin from Ukraine - 2018.06.03 10:17