products

Description

The 3500/94 VGA Display uses a standard color VGA monitor with Touch Screen technology to display 3500 data. This product has two components, the 3500/94 VGA Display Module and its I/O card, and secondly, the VGA display monitor. The display monitor, with standard cabling, can be mounted up to 10 m (33 ft) from the rack. The 3500/94 displays all 3500 Machinery Protection System information, including: l System Event List l Alarm Event List l All module and channel data l 3300-style rack view (API-670) l Current alarm data (quick view) l Nine custom display options.

All are accessed through a Main Menu using a Touch Screen. Configure the 3500/94 modules for language and for the type of VGA display through the 3500 Rack Configuration Software. All other types of data configurations are done locally at the display, giving the operator control over the displayed data. You can configure nine custom screens locally. As an example, one custom screen may show all the 1X measurements, while another shows all the Gap values, or the custom screens may be organized into machine train groupings. You can organize all system data into any specified sets assigned the data to a custom screen. An API-670 compatible screen is also selectable. This screen shows "3300-style" bargraph and numerical values for the monitor in each slot of the rack. Direct or Gap values are shown for each module along with OK and Bypass LEDs.

Multiple Rack Feature Selecting the 3500/94 Display Router Box provides an additional viewing feature. This feature allows you to view a maximum of four racks with one display. Each rack must be individually viewed, but the rack address and alarm status of

each rack is always visible in the upper right corner of the screen. The Display Router Box must be located within 6 m (20 ft) of each 3500 rack. The old EIA rack mount for the Parker RS PowerStation Monitor will not work with the Advantech FPM-8151H Monitor. Likewise, the EIA rack mount for the Advantech FPM-8151H Monitor will not work with the Parker RS PowerStation Monitor.

Display Monitors Bently Nevada offers five approved display monitor types, which are the only types that will properly interface to the 3500/94 VGA modules. Each display is intended to meet different application requirements. It is important that you make the right selection for your application. For outdoor installations, all display types require a hood to block direct sunlight. Each display requires a separate power supply. As an option, the KVM Extender may be selected for remote sites at a distance up to 305 m (1000 ft). While the KVM Extender will meet most viewing requirements, the extender will degrade picture image quality and may be affected by noisy environments. Therefore, you should avoid using the KVM Extender unless the standard cable length is not adequate. All display monitors use Touch Screens. Because the Touch Screen controllers differ, you must configure each display monitor type using the 3500 Rack Configuration Software. The 3500/94 offers a Display Router Box that allows up to four 3500 racks to drive a single display. The Display Router Box acts as a switch box that allows the operator to switch the display between racks. An important feature of the Display Router Box is its ability to show the alarm and OK status of each connected rack.