ABB RDCO-01C Fiber Optic Communication Adapter
Description
| Manufacture | ABB |
| Model | RDCO-01C |
| Ordering information | RDCO-01C |
| Catalog | VFD Spares |
| Description | ABB RDCO-01C Fiber Optic Communication Adapter |
| Origin | United States (US) |
| HS Code | 85389091 |
| Dimension | 16cm*16cm*12cm |
| Weight | 0.8kg |
Details
The ABB RDCO-01C Fiber Optic Communication Adapter,Ambient conditions: The applicable ambient conditions.
Electromagnetic emissions: EN 50081-2; CISPR 11
RDC0-01C Bus Interface Units 1c670GB1002(F) and lC670GBl102A or later support Hot Insertion/Removalof modules in the l/0 Station.
Hot insertion/Removal means that modules can be removed and replaced while l/0 Station poweris applied without affecting the BlU or other modules in the l/0 Station.
Separate l/0 modulepower must be switched off to RDC0-01C the module being inserted or removed.Hot Insertion/Removal requires the use of specific modules and l/0 terminal blocks.RDC0-01C 1/0 modules having catalog number suffix J or above.
These modules have a projectingalignment tab that fits into a corresponding alignment tab on l/0 Terminal Blocks listed below.
Note that modules with this tab can also be installed on older l/0 Terminal Blocks that do nothave mating alignment tabs. However, Hot insertion/Removal are not supported in such aninstallation.
Connectors:
• 20-pin pinheader
• 4 transmitter/receiver connector pairs for fiber optic cable.
Type: Agilent Technologies Versatile Link. Communication
speed: 1, 2 or 4 Mbit/s
Operating voltage: +5 V DC ±10%, supplied by the control unit of the drive.
Electromagnetic immunity: IEC 1000-4-2 (limits: industrial,
