products

ABB PFXA 401SF 3BSE024388R4 is a control unit module,

Front and side operated switch fuse groups are available from 1 pole to 4 poles,Additional accessories can reach 6~8 poles.

Select the corresponding installation accessories to combine the transfer switch and mechanical interlock switch

Use together: plug-in and rear wiring installation. The 4th pole of the 4-pole switch fuse is quite useful.

The 4th pole of the switch is fusible and non-fusible: 0S100~160.3+N pole switch is equipped with a built-in solid-state neutral line, but no additional space is required

Millmate Controller 400 has been designed to offer a lot of functionalities and at the same time a high degree of user-friendliness.

The control unit covers all edge sensor installation possibilities. This means the user only has to follow the step-by-step instructions in order to set up the control unit and to have correct strip edge and center position and width calculated.

Calculates true strip position and width in relation to the mill

Filter times from 10 ms

Easily configurable analogdigital inputsoutputs

Digital edge position level detectors

Digital min. and max. width level detectors

Unit selection (mm, inch)

Self-diagnostic test system including continuous edge sensor test

Simulation mode for easy check of system integration