5439-629(5500-325) Supplier - Woodward 8200-226 Servo Position Controller – RuiMingSheng
5439-629(5500-325) Supplier - Woodward 8200-226 Servo Position Controller – RuiMingSheng Detail:
Description
| Manufacture | Woodward |
| Model | 8200-226 |
| Ordering information | 8200-226 |
| Catalog | Servo Position Controller |
| Description | Woodward 8200-226 Servo Position Controller |
| Origin | United States (US) |
| HS Code | 85389091 |
| Dimension | 16cm*16cm*12cm |
| Weight | 0.8kg |
Details
The 8200-226 is the latest released model of the SPC (Servo Position Controller). It replaces models 8200-224 and 8200-225. The SPC positions a hydraulic or pneumatic actuator based on a position demand signal received from a control. The SPC positions a single-coil actuator using single or dual position feedback devices. The position demand signal can be sent to the SPC via DeviceNet, 4–20 mA, or both. A software program running on a Personal Computer (PC) allows the user to easily configure and calibrate the SPC.
The SPC Service Tool is used to configure, calibrate, adjust, monitor, and troubleshoot an SPC. The service tool runs on a PC and communicates with the SPC through a serial connection. The serial port connector is a 9-pin sub-D socket and uses a straight-through cable to connect to the PC. Woodward offers a USB to 9-pin Serial Adapter kit if needed for new computers that do not have a 9-pin serial connector (P/N 8928-463).
This kit contains a USB adapter, software, and a 1.8 m (6 ft) serial cable. (See Chapter 4 for SPC Service Tool installation instructions.) The SPC is configured by using the SPC Service Tool’s configuration file editor to create a file that is then loaded into the SPC. The SPC Service Tool can also read an existing configuration from an SPC into the configuration file editor.
The first time an SPC is connected to an actuator, it must be calibrated to the actuator’s position feedback transducer. The user is guided through the calibration process by the service tool. Calibration can also be performed by the control via the DeviceNet link. The calibration procedure can be found in the GAP™ help file.
The SPC requires a voltage source of 18 to 32 Vdc, with a current capacity of 1.1 A max. If a battery is used for operating power, a battery charger is necessary to maintain a stable supply voltage. The power line should be protected with a 5 A, 125 V fuse capable of withstanding a 20 A, 100 ms in-rush when power is applied.
Datasheet link
Product detail pictures:
Related Product Guide:
We normally think and practice corresponding towards the change of circumstance, and grow up. We aim at the achievement of a richer mind and body plus the living for 5439-629(5500-325) Supplier - Woodward 8200-226 Servo Position Controller – RuiMingSheng , The product will supply to all over the world, such as: Japan, Bulgaria, Qatar, "Good quality, Good service " is always our tenet and credo. We take every effort to control the quality, package, labels etc and our QC will check every detail during producing and before shipment. We are willing to establish long business relationship with those who seek the high quality products and good service. We have set up a wide sales network across European countries, North of America, South of America, Middle East, Africa, East Asia countries.Please contact us now, you will find our professional experience and high quality grades will contribute to your business.
By Honorio from Tajikistan - 2018.09.21 11:44
After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
By Sabrina from Mauritius - 2018.09.16 11:31
